Product illustration; final geometry follows the approved drawing.
Choose the turning angle and bend radius, then specify both end diameters and wall thicknesses. Include tangent lengths when installation space is restricted.
Selection reference: Pipe elbows / Pipe tees — JIS B2311 · 5K / 20K · SR.
The listed values are alternatives within a series, not one combined specification. Identify the required combination.
Selection identifiers: Specified standard: JIS B2311; Pressure designation: 5K / 20K; Bend radius designation: SR.
Choose the turning angle and bend radius, then specify both end diameters and wall thicknesses. Include tangent lengths when installation space is restricted.
Please confirm before quotation: Material / grade / Size designations.
| Product forms | Pipe elbows / Pipe tees |
|---|---|
| Specified standard | JIS B2311 |
| Pressure designation | 5K / 20K |
| Bend radius designation | SR |
| Catalogue reference | HC-0383 |
Confirm the material grade, dimensions, pressure class and standard together against the approved drawing before ordering. Schedule denotes wall thickness, not a pressure rating.
Send a bill of materials or drawing with item quantities, material grades, dimensions, standard and edition, inspection documents, packing and destination. Identify any requirements that still need technical review.
Contact our sales teamPipe elbows / Pipe tees — JIS B2311 · 5K / 20K · SR — Include the material grade, dimensions, applicable standard and quantity.
Specified standard: JIS B2311 The applicable standard, mating components and project design conditions must be reviewed together. Size, rating and material combinations are confirmed in the agreed quotation or drawing.
List the material certificates, inspection records and traceability documents required by your project. Their scope and availability must be agreed before ordering.
Include the material grade, dimensions, applicable standard and quantity.
Identify each fitting type and connection size in the bill of materials. Keep material specification, dimensional standard and wall-thickness schedule separate. For fittings with multiple ends, provide the dimensions of every end and the required orientation.
Choose the turning angle and bend radius, then specify both end diameters and wall thicknesses. Include tangent lengths when installation space is restricted.
Identify each fitting type and connection size in the bill of materials. Keep material specification, dimensional standard and wall-thickness schedule separate. For fittings with multiple ends, provide the dimensions of every end and the required orientation.
Send us your drawings or specifications — our engineers will reply with a competitive quotation within 24 hours.
