Concentric reducers / Eccentric reducers Product series — SCH10 / SCH160
Specify large-end and small-end diameters with their wall thicknesses. Confirm the reducer length and alignment with the piping drawing.
Product illustration; final geometry follows the approved drawing.
Pipe Fittings
Concentric reducers / Eccentric reducers — STD / SCH40 / SCH80 / SCH120 / XXS · Seamless / Welded
Specify large-end and small-end diameters with their wall thicknesses. Confirm the reducer length and alignment with the piping drawing.
- Product forms
- Concentric reducers / Eccentric reducers
- Wall thickness / Schedule
- STD / SCH40 / SCH80 / SCH120 / XXS
- Construction
- Seamless / Welded
- Catalogue reference
- HC-0474
Product overview
Selection reference: Concentric reducers / Eccentric reducers — STD / SCH40 / SCH80 / SCH120 / XXS · Seamless / Welded.
The listed values are alternatives within a series, not one combined specification. Identify the required combination.
Selection identifiers: Wall thickness / Schedule: STD / SCH40 / SCH80 / SCH120 / XXS; Construction: Seamless / Welded.
Specify large-end and small-end diameters with their wall thicknesses. Confirm the reducer length and alignment with the piping drawing.
In addition to both end sizes, identify the offset and flat-side orientation. Confirm these details against the installation drawing.
Please confirm before quotation: Material / grade / Size designations / Specified standard.
Technical specifications
| Product forms | Concentric reducers / Eccentric reducers |
|---|---|
| Wall thickness / Schedule | STD / SCH40 / SCH80 / SCH120 / XXS |
| Construction | Seamless / Welded |
| Catalogue reference | HC-0474 |
Confirm the material grade, dimensions, pressure class and standard together against the approved drawing before ordering. Schedule denotes wall thickness, not a pressure rating.
Prepare a clear request for quotation
Send a bill of materials or drawing with item quantities, material grades, dimensions, standard and edition, inspection documents, packing and destination. Identify any requirements that still need technical review.
Contact our sales teamProcurement questions
What should I include in an inquiry?
Concentric reducers / Eccentric reducers — STD / SCH40 / SCH80 / SCH120 / XXS · Seamless / Welded — Include the material grade, dimensions, applicable standard and quantity.
How are dimensions and service suitability confirmed?
The applicable standard, mating components and project design conditions must be reviewed together. Size, rating and material combinations are confirmed in the agreed quotation or drawing.
Can I request inspection documents?
List the material certificates, inspection records and traceability documents required by your project. Their scope and availability must be agreed before ordering.
Contact sales
Request a quote
Include the material grade, dimensions, applicable standard and quantity.
Related products
Concentric reducers / Eccentric reducers Product series — Carbon steel / Stainless steel · DN15 – DN2000 · Protective oil
Specify large-end and small-end diameters with their wall thicknesses. Confirm the reducer length and alignment with the piping drawing.
Concentric reducers / Eccentric reducers Product series — ASME B16.9 · Stainless steel · Seamless / Welded
Specify large-end and small-end diameters with their wall thicknesses. Confirm the reducer length and alignment with the piping drawing.