Stainless Steel Tees
Stainless steel tees for branch piping. Specify the grade, run and branch sizes, wall thickness and equal or reducing configuration.
Product illustration; final geometry follows the approved drawing.
Steel Tees
Pipe tees Product series — ASME B16.9 / JIS B2311 / DIN 2615 · Carbon steel / Stainless steel · 90° / 45° · Seamless / Welded
Choose the turning angle and bend radius, then specify both end diameters and wall thicknesses. Include tangent lengths when installation space is restricted.
- Product forms
- Pipe elbows / Pipe tees / Pipe end caps / Concentric reducers / Eccentric reducers
- Specified standard
- ASME B16.9 / JIS B2311 / DIN 2615
- Material / grade
- Carbon steel / Stainless steel
- Angle
- 90° / 45°
Product overview
Selection reference: Pipe tees Product series — ASME B16.9 / JIS B2311 / DIN 2615 · Carbon steel / Stainless steel · 90° / 45° · Seamless / Welded.
The listed values are alternatives within a series, not one combined specification. Identify the required combination.
Selection identifiers: Specified standard: ASME B16.9 / JIS B2311 / DIN 2615; Material / grade: Carbon steel / Stainless steel; Angle: 90° / 45°; Construction: Seamless / Welded.
Choose the turning angle and bend radius, then specify both end diameters and wall thicknesses. Include tangent lengths when installation space is restricted.
Confirm the pipe outside diameter, wall thickness, cap depth and end preparation. State whether the end closure needs additional machining.
Specify large-end and small-end diameters with their wall thicknesses. Confirm the reducer length and alignment with the piping drawing.
In addition to both end sizes, identify the offset and flat-side orientation. Confirm these details against the installation drawing.
Please confirm before quotation: Size designations.
Technical specifications
| Product forms | Pipe elbows / Pipe tees / Pipe end caps / Concentric reducers / Eccentric reducers |
|---|---|
| Specified standard | ASME B16.9 / JIS B2311 / DIN 2615 |
| Material / grade | Carbon steel / Stainless steel |
| Angle | 90° / 45° |
| Construction | Seamless / Welded |
| Catalogue reference | HC-0443 |
Confirm the material grade, dimensions, pressure class and standard together against the approved drawing before ordering. Schedule denotes wall thickness, not a pressure rating.
Prepare a clear request for quotation
Send a bill of materials or drawing with item quantities, material grades, dimensions, standard and edition, inspection documents, packing and destination. Identify any requirements that still need technical review.
Contact our sales teamProcurement questions
What should I include in an inquiry?
Pipe tees Product series — ASME B16.9 / JIS B2311 / DIN 2615 · Carbon steel / Stainless steel · 90° / 45° · Seamless / Welded — Include the material grade, dimensions, applicable standard and quantity.
How are dimensions and service suitability confirmed?
Specified standard: ASME B16.9 / JIS B2311 / DIN 2615; Material / grade: Carbon steel / Stainless steel The applicable standard, mating components and project design conditions must be reviewed together. Size, rating and material combinations are confirmed in the agreed quotation or drawing.
Can I request inspection documents?
List the material certificates, inspection records and traceability documents required by your project. Their scope and availability must be agreed before ordering.
Contact sales
Request a quote
Include the material grade, dimensions, applicable standard and quantity.
Related products
Carbon Steel Tees
Carbon steel tees for branch connections. Provide run and branch dimensions, equal or reducing configuration, material grade and wall thickness.
Pipe tees — ASME B16.9 · 16" · SCH20 · Yellow paint
State whether an equal or reducing tee is required. Specify the run size and branch size separately, including wall thickness at each connection. Confirm branch orientation and centre-to-end dimensions from the piping layout. A tee and a reducer have different connection geometry and should be listed as separate items.